tokyo4j [Thu, 3 Oct 2024 00:23:50 +0000 (09:23 +0900)]
theme: draw hover overlay in the correct scale
The hover icon buffer on which the hover overlay is draw can be larger
than the button size when a large non-hover icon is provided by user. In
this case, we should scale up all the coorinates that are used to draw
the hover overlay. Before this commit, corner radius and padding.width
are not scaled correctly.
This commit fixes it by scaling the cairo context with cairo_scale()
when drawing the hover overlay.
John Lindgren [Thu, 3 Oct 2024 11:31:29 +0000 (07:31 -0400)]
ssd: limit icon size to ~85% of window_button_width
This ensures that the icon doesn't push right up to the window edge
(or left-aligned title) when using a large font or narrow button width.
In the default config (with 10pt font), it makes no difference since
the limiting factor on the icon size is the titlebar height anyway.
I spent way too much time over-thinking how to compute the padding.
I think 2px on each side is reasonable (and it should be equal on each
side), so window_button_width/10 (rounded down) should be fine.
Eventually the padding should probably be configurable anyway.
Jens Peters [Wed, 2 Oct 2024 20:32:47 +0000 (22:32 +0200)]
data: disable Inhibit D-BUS interface in xdg-portals configuration (#2205)
The GTK xdg-portal implementation, which is used as
the default behind the wlr xdg-portal implementation,
exposes the Inhibit interface even on a non-Gnome
session. Unfortunately this D-BUS interface does not
work on labwc.
By explicitly disabling this interface, firefox and may be
other applications are not tricked into using the
xdg-portal interface but use the Wayland IdleInhibit
protocol instead which labwc supports.
Rick Calixte [Tue, 1 Oct 2024 20:33:45 +0000 (16:33 -0400)]
Add labwc to XDG_CURRENT_DESKTOP to support a portals.conf (#1716)
The previous `UseIn` key was deprecated in xdg-desktop-portal 1.17/1.18.
It has been superceded by the portals.conf structure so that each
desktop can configure the precise desired structure for portals. In
addition, support was added to the Desktop Entry Specifications to
support a `DesktopNames` key that login managers will use to set
XDG_CURRENT_DESKTOP.
cursor: prevent Drag mousebinds from running without button press
For `Drag` mousebinds, `pressed_in_context` is set by
`cursor_process_button_press()` and cleared by `cursor_process_motion()`
which runs actions bound to them. However, when `cursor_process_motion()`
is called while interactive move/resize, it doesn't clear
`pressed_in_context` due to the early-return and the `Drag` mousebinds are
unexpectedly executed on another call to `cursor_process_motion()` after
the interactive move/resize is finished by button release, even when the
button is not pressed.
So this commit fixes it by always clearing `pressed_in_context` on button
releases.
John Lindgren [Tue, 1 Oct 2024 14:16:29 +0000 (10:16 -0400)]
xdg: try to handle slow un-maximize with empty natural geometry better
In the case of an initially-maximized view which is taking a long time
to un-maximize (seen for example with Thunderbird on slow machines), we
may end up in handle_configure_timeout() with an empty pending geometry.
In that case we have no great options (we can't center the view since we
don't know the un-maximized size yet), so set a fallback position.
v2: check wlr_box_empty() before comparing pending and current
- GdkPixbuf replaced with struct lab_data_buffer
- Progressive and in-memory loading code removed
- Two functions that had separate BSD copyright rewritten
- Stores colors as ARGB32 earlier in the decoding process for efficiency
- Limited to 1024x1024 px and 1024 colors to prevent abuse
- Uses struct buf to build strings, in place of manual g_new/g_realloc
- Uses xzalloc/xznew_n for other memory allocations
- Uses g_strlcpy in place of banned strcpy/strncpy/strncat
- Uses standard C types (int, bool, etc.) in place of the GLib ones
- Follows labwc coding style (whitespace, braces, letter case, etc.)
- Et cetera ...
John Lindgren [Mon, 30 Sep 2024 04:24:13 +0000 (00:24 -0400)]
icon-loader: match more application icons via fuzzy match
Add fallback logic to match reverse-URL .desktop file names when
the app_id is just the base name (e.g. "thunderbird" ->
org.mozilla.Thunderbird.desktop).
xdg: fix de-synced SSD when shrinking Thunderbird window
On a slow mechine or heavy load, we sometimes see de-synced SSD with
Thunderbird windows when shrinking it. Here's how it happened:
1. Labwc sends a configure event.
2. The configure event timeouts and labwc resets view->{pending,current}
with the old geometry.
3. Thunderbird updates the toplevel window geometry and the toplevel
surface size, but not the subsurface size. Then it sends a commit.
4. Since now the committed window geometry and view->pending are
different, the workaround for Qt apps is applied and the whole surface
extent is set to view->current. Thus SSD stays in the old geometry.
5. Thunderbird finally updates the subsurface size.
So, this commit fixes this conflict between Thunderbird and the workaround
for Qt apps by using the toplevel surface size instead of the whole
surface extent to update view->current.
ssd: fix crash on app_id updates while the app is in fullscreen
`view->ssd_enabled && view->ssd == NULL` is possible during the client is
in fullscreen. So we need to check if `view->ssd` is NULL first in
`ssd_update_window_icon()`.
The default `titleLayout` is updated to `icon:iconify,max,close` which
replaces the window menu button with the window icon.
When the icon file is not found or could not be loaded, the window menu
icon as before is shown.
The icon theme can be selected with `<theme><icon>`.
This commit adds libsfdo as an optional dependency. `-Dicon=disabled` can
be passsed to `meson setup` command in order to disable window icon, in
which case the window icon is always replaced with a window menu button.
David Turner [Mon, 23 Sep 2024 15:17:22 +0000 (16:17 +0100)]
Don't detect edge-resizes in configure timeout
If a client times out responding to a configure request then the
handle_configure_timeout() callback is run. This cleans up the pending
state and moves the view to the pending location, but keeps the current
size. The idea is to stop slow applications causing too much lag when
the user manipulates the window. This callback used
view_impl_apply_geometry() to actually apply the changes.
view_impl_apply_geometry() contains some heuristics to detect if we're
resizing a window from the top, left, or top-left, and if so to do the
expected behaviour of keeping the window's bottom/right corner in the
same place. However, that code was erroneously triggering in the case
when the user requests to change a window from maximized to fullscreen
but the client times out on the configure request.
handle_configure_timeout() decides to enact the movement of the window
but keep its size at the old size and tells view_impl_apply_geometry()
to do that.
The current view position and size is 0,64 1920x1016, the pending
position/size is 0,0 1920x1080, and the last committed size is
1920x1016. Looking at the current and pending position and size, the
height changes while the bottom edge stays in the same place so this
looks like a top-edge-resize and view_impl_apply_geometry() decides to
keep the window's bottom edge in the same place while setting the
position according to the last-committed size. This results in the
window staying at position 0,64 size 1920x1016 despite being marked as
fullscreen.
My solution to this is just to change handle_configure_timeout() to
directly change the view's position and call view_moved() if necessary.
The idea of handle_configure_timeout() is to action the window movement
now while discarding the size change, and let the size change take place
later on when the client catches up. The logic of
view_impl_apply_geometry() doesn't make sense in this case so just avoid
it entirely.
Refactor the logic of placing client-menu with ShowMenu action
Before this commit, we assumed `ShowMenu` action is not bound to any
buttons other than window menu button and always place the client-menu
under the window-menu button when atCursor="no". Also, it was going to be
difficult to distinguish whether the action is executed from the window
menu button or the window icon, which will be added soon.
This commit fixes it to open the menu under the actually-clicked button by
passing `cursor_context` to `actions_run()`, with some refactoring:
- `seat->pressed.resize_edges` is removed and it's calculated from the
cursor position and `seat->pressed.type` just before running Resize
action. This slightly changes the existing logic to determine the
resizing edges with Alt-Right + Drag mousebinding, but
`seat->pressed.type` is still stored on button press so it doesn't bring
back the issue #543.
- `seat->pressed.toplevel` is removed and `get_toplevel()` in
`update_pressed_surface()` may be called more often, but its overhead
will be negligible.
We don't know if the client-list-combined-menu is standalone
ie. triggered by a keybind or a submenu of another menu.
So we update client-list-combined-menu every time ShowMenu is called.
action: open the client menu underneath the window menu button
It looks slightly awkward when the client menu shows up
in the left corner of the view and the window menu button
is configured to be on the right side.
...utilizing x,y coordinates where values can be a number, a negative
number, a percentage or "center".
- (0,0) is top left corner
- (-0,-0) is bottom right corner
- % is percentage of width and/or height
- 'center' centers the menu vertically and/or horizontally
tokyo4j [Sun, 25 Aug 2024 07:33:41 +0000 (16:33 +0900)]
ssd: allow ssd to be smaller than minimal size by hiding buttons
This fixes the ugly look of SSD for tiny windows (e.g. "xterm -geometry
1x1") due to the early return in `ssd_update_geometry()`. Now SSDs are
rendered correctly for those windows by hiding some buttons when the
window width is smaller than the total width of buttons. Additionally for
windows smaller than (button width)*2, the corners are un-rounded so a
small titlebar can be rendered with a scene-rect.
Revert "src/interactive.c: don't unshade when view is un-tiled by dragging"
When labwc un-tiles views, it generally changes their size, which sends
a configure request to the client. However, because the view has been
disabled in the wlroots scene, it will not receive and process the
configure when labwc expects. Instead, the handling will be deferred
until the user unshades the view at some arbitrary time in the future,
resulting in labwc registering complains like
[../src/xdg.c:239] client did not respond to configure request in 100 ms
Furthermore, the reconfigure will still generally produce flicker (as
the view opens in its tiled size and then jumps to its natural
geometry). Because skipping the unshade might cause client problems and
doesn't eliminate the problem it sought to resolve, let's revert this.
Applies drag resistance unidirectionally for horizontally/vertically
maximized windows, allowing them to be dragged without being untiled
immediately. When the distance of cursor movement orthogonal to the
maximized direction exceeds <resistance><unMaximizeThreshold>.
While dragging a horizontally/vertically maximized window, edge/region
snapping is disabled to prevent unintentional snapping and overlays.
This commit also includes some refactoring to simplify the logic.
tokyo4j [Fri, 23 Aug 2024 04:05:13 +0000 (13:05 +0900)]
ssd: fix incorrect cursor shape on titlebar corner without buttons
Before this commit, the backgrounds of titlebar corners were tagged as
LAB_SSD_PART_CORNER_TOP_{LEFT,RIGHT}, so the cursor shape on titlebar
corners without buttons were north-west or north-east.
This commit fixes it by tagging those backgrounds as
LAB_SSD_TITLEBAR_CORNER_{LEFT,RIGHT}.
Consolatis [Fri, 23 Aug 2024 18:09:47 +0000 (20:09 +0200)]
common/buf.c: use 0 directly in vsnprintf()
This works around a wrong truncation warning in older GCC versions:
```
../src/common/buf.c:110:10: error: null destination pointer [-Werror=format-truncation=]
110 | int n = vsnprintf(NULL, size, fmt, ap)
```
Johan Malm [Thu, 9 May 2024 20:20:15 +0000 (21:20 +0100)]
menu: support titles
...defined by `<separator label="">`.
Also add the theme option `menu.title.bg.color: #589bda`
The following will be added in separate commits
- menu.title.bg.border.color: #7cb6ec
- menu.title.text.color: #ffffff
- menu.title.text.justify: center
tokyo4j [Tue, 13 Aug 2024 01:02:46 +0000 (10:02 +0900)]
xdg: destroy foreign toplevel handle on unmap
xdg-shell protocol says:
All active operations (e.g., move, resize) are canceled and all
attributes (e.g. title, state, stacking, ...) are discarded for an
xdg_toplevel surface when it is unmapped.
So, when a xdg-toplevel is unmapped (not minimized), the corresponding
foreign handler should be destroyed to reset attributes.
tokyo4j [Tue, 13 Aug 2024 01:01:49 +0000 (10:01 +0900)]
xwayland: sync foreign-toplevel and associated outputs on re-map
Fixes a bug that `zwlr_foreign_toplevel_handle_v1::output_enter` is not
sent when a xwayland surface is re-mapped (e.g. opening Slack desktop
app when it's running in background).
Consolatis [Wed, 14 Aug 2024 18:17:50 +0000 (20:17 +0200)]
scene-helpers: use pending_commit_damage, chases wlr!4253
Using the output damage_ring for early out will break VRR in
direct scanout mode. The reason being that the damage_ring
will be completely ignored in that mode so we need to check
`output->pending_commit_damage` instead. This matches with
what wlroots has been doing since [0] and it was missed in
the initial port to wlroots 0.18.x.
However, that would then break the magnifier which only adds
its damage to the damage ring. After some discussion with
the wlroots devs we came up with a solution that should work
for both, wlroots 0.18.0 and when [1] is backported to 0.18.1.
Note that even with this PR, VRR in direct scanout mode is
broken in 0.18.0 from the wlroots side and will be fixed once
[1] is backported to the 0.18 branch and 0.18.1 is released.
Chromium sends 2 commits before the commit with a buffer attached. We
were just checking `wlr_box_empty(&view->pending)` to handle the cases
where an initially maximized/fullscreen client is windowed, but that
check was also returning true on the 2nd commit from Chromium, resulting
in an error message: "view has empty geometry, not centering".
71451173 validates the xdg-activation token more strictly by verifying
the source surface attached to the token. That improves the security by
preventing arbitrary focus-stealing.
However, not all clients attach a right source surface to the token or
use the received token for activation. For example, when a notification
client requests thunderbird to activate its window, thunderbird doesn't
use the token passed by the notification client and instead use their own
token, thus the activation is rejected as the surface attached to the
token is not focused.
We will add options to configure the policy for activation requests or
implement urgency hint in some way in the future and reland the source
surface verification.
projects / proto / labwc.git / log